Hi Scott,
 
   Thanks for the info.  I think that I'd rather get another SCSI adapter in the NetApp.  I was looking at one of Qlogic's cards because that's what NetApp uses, here is the card that I'm thinking about getting. http://www.qlogic.com/products/ultra_series/ultra_three.asp  Let me know if you think this would work.
 
Thanks,
 
Blake
 
----- Original Message -----
From: Scott Gelb
To: 'Blake Folgner'
Sent: Wednesday, May 01, 2002 4:04 PM
Subject: RE: Adic FastStore DLT

You have an HVD interface on the F760.  You need an LVD/SE (LVD supports 25 foot, while SE is much shorter...about .5-1ft) converter.  If you check CDW or other online shops, you'll find an HVD to LVD/SE converter that will do the trick... However, it isn't a supported configuration.  HVD is +-12V,  LVD is +-7V, and SE is +-5V....most SCSI Adapters that are LVD also support SE.
 

Thank you,

Scott Gelb

scottg@insightintegratedsystems.com

http://www.insightintegratedsystems.com
http://www.insightinvestments.com
714-939-2321 (Office)
714-290-4736 (Cell)
714-939-2300 (Main)
714-939-2395 (Fax)

Insight Integrated Systems
600 City Parkway West
Suite 500
Orange, CA  92868

-----Original Message-----
From: Blake Folgner [mailto:admin@webrunners.com]
Sent: Wednesday, May 01, 2002 1:46 PM
To: toasters@mathworks.com
Cc: Steve Roche
Subject: Re: Adic FastStore DLT

Hello All,
 
  Thanks your all of your help.  The problem is that the DLT drive is and SE interface while the F760 is a Fast Wide Differential interface.  Now for the next question.  How would I get this thing to work with my F760.  Is there another card I can buy for the Net App?
 
Thanks
 
Blake
----- Original Message -----
From: Steve Roche
To: 'Blake Folgner'
Sent: Wednesday, May 01, 2002 1:10 PM
Subject: RE: Adic FastStore DLT

Check to see if you Autoloader has a single ended SCSI interface.
The F7XX Series Filers shipped out of the box with a Fast Wide Differential interface.
Connecting that to a SE interface will hang the Filer.
 
Seen it many times in the past.

 -----Original Message-----
From: Blake Folgner [mailto:admin@webrunners.com]
Sent: Wednesday, May 01, 2002 3:31 PM
To: toasters@mathworks.com
Subject: Adic FastStore DLT

Hello,
 
  I'm trying to get my Adic FastStore 22 tape autoloader to work with my F760 i'm running 6.2.1.  I set the loaders SCSI ID to 0 and the drive to 1 and I have also tried other combinations also, keeping in mind that the SCSI card in the F760 uses ID 7.  When I boot the filer up it just hangs after it checks the memory.  If I unplug the autoloader it boots up with no problems.  The autoloader is terminated and all connections are good.  Any help would be very appreciated.
 
Thanks for your help.
 
Blake