Use the advanced command PKTT on the filer.  It is similar to a SNIFFER capture and can be decoded by ETHEREAL.

 

From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Pazder, Steve B
Sent: Tuesday, April 24, 2007 12:38 PM
To: toasters@mathworks.com
Subject: network troubleshooting

 

Hello World! 

 

Our Network admin has been working with Cisco to troubleshoot some issues (limited to 1 switch on 1 particular floor).  While our Filers are not involved in this issue, fingers are generally pointed in that direction just because they exist....on the network.  Our network admin is looking for information from the Filers that would be akin to a TCP dump.  Ifstat, netstat and statit output are not providing the information being looked for (handshake info, etc).  I haven't run across this particular issue before and don't recall ever seeing it presented to Toasters.  Does anyone know of a way to get the actual communication dumps (again, a TCP dump) from a Filer?

 

Thanks!

 

Steve

 

Confidentiality Notice:

This e-mail is intended only for the personal and confidential use of the individual to whom it is addressed and may contain information that is privileged, confidential and protected by law. If you are not the intended recipient, you are hereby notified that any use or disclosure of this information is strictly prohibited. If you have received this message in error, please notify the sender immediately by reply e-mail and delete the original message. Your compliance is appreciated.