I would check for any  differences between the qual_devices files between N-Series and fas for those shelf controller boards and disks.  That may help. 


On Wed, Oct 25, 2017 at 12:26 PM, Chris Hague
<Chris_Hague@ajg.com> wrote:

Will be creating a new aggregate so that I can move vol0 onto it, then destroy current aggr and remove the better DS4246 shelves.

 

From: Fred Grieco [mailto:fredgrieco@yahoo.com]
Sent: 25 October 2017 17:20
To: Chris Hague <Chris_Hague@ajg.com>; <Toasters@teaparty.net> <Toasters@teaparty.net>
Subject: Re: Using N-Series shelf as swing kit

 

I vaguely remember doing this.  It didn't make a difference.  Are you just using the disks or are you trying to transition an aggregate? 

 

On Wed, Oct 25, 2017 at 11:36 AM, Chris Hague

Interested to know if anyone has connected an N-Series disk shelf up to a 7-Mode FAS?

 

Under the hood it’s a DS4243 currently running on an N-Series with ONTAP 8.0.2

We will be connecting it to a FAS3250 running ONTAP 8.2.4 P6

 

Both systems are not under support.

_______________________________________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters