Hey there,
I’ve got a FAS2554 here which I’ve pushed through wipeconfig recently and interestingly, both controllers show different layouts after this process.
Node 1 show the following root aggregate:
RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB/blks) Phys (MB/blks)
--------- ------ ------------- ---- ---- ---- ----- -------------- --------------
tparity 0b.00.1P2 0b 0 1 SA:B 0 FSAS 7200 55176/113000448 55184/113016832
dparity 0b.00.3P2 0b 0 3 SA:B 0 FSAS 7200 55176/113000448 55184/113016832
parity 0b.00.5P2 0b 0 5 SA:B 0 FSAS 7200 55176/113000448 55184/113016832
data 0a.00.6P2 0a 0 6 SA:A 0 FSAS 7200 55176/113000448 55184/113016832
data 0b.00.7P2 0b 0 7 SA:B 0 FSAS 7200 55176/113000448 55184/113016832
data 0a.00.8P2 0a 0 8 SA:A 0 FSAS 7200 55176/113000448 55184/113016832
data 0b.00.9P2 0b 0 9 SA:B 0 FSAS 7200 55176/113000448 55184/113016832
data 0a.00.10P2 0a 0 10 SA:A 0 FSAS 7200 55176/113000448 55184/113016832
data 0b.00.11P2 0b 0 11 SA:B 0 FSAS 7200 55176/113000448 55184/113016832
data 0a.00.12P2 0a 0 12 SA:A 0 FSAS 7200 55176/113000448 55184/113016832
data 0b.00.13P2 0b 0 13 SA:B 0 FSAS 7200 55176/113000448 55184/113016832
Node 2 does not have partitioned disks for root:
RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB/blks) Phys (MB/blks)
--------- ------ ------------- ---- ---- ---- ----- -------------- --------------
dparity 0a.00.0 0a 0 0 SA:B 0 FSAS 7200 5614621/11498743808 5625872/11521787400
parity 0a.00.2 0a 0 2 SA:B 0 FSAS 7200 5614621/11498743808 5625872/11521787400
data 0a.00.4 0a 0 4 SA:B 0 FSAS 7200 5614621/11498743808 5625872/11521787400
Also, Node1 has raid_tec on the root aggregate, but that’s OK I guess.
So what I’d like to do now is to migrate the root aggregate on node2 to an aggregate with partitioned disks too, of course, but I cannot find any information on how to do that.
I’ve tried to manually create an aggregate on node 2 and have manually assigned the root partitions to it, but it’s always telling me that the disks are not owned by node 2 or the new migrate-root command just does not seem to support partitioned
disks.
Trying to avoid another wipeconfig here, since that will take ages again for zeroing all the disks…
There’s no data on the filer as of yet, so we’re good to try with whatever someone can come up with
J
Thanks,
Alexander Griesser
Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail:
AGriesser@anexia-it.com
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt
Geschäftsführer: Alexander Windbichler
Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601