Hey,
did anyone ever encounter such a mismatch?
Customer reported that they installed new disks in slots 0 and 1, but this is what I can see here:
CLUSTER::*> disk show -container-type unassigned
Usable Disk Container Container
Disk Size Shelf Bay Type Type Name Owner
---------------- ---------- ----- --- ------- ----------- --------- --------
1.11.22 - 11 22 SAS unassigned - -
1.11.23 - 11 23 SAS unassigned - -
2 entries were displayed.
Whereas:
CLUSTER::*> node run -node node1 disk show -n
DISK OWNER POOL SERIAL NUMBER HOME DR HOME
------------ ------------- ----- ------------- ------------- -------------
0b.11.1 Not Owned NONE 50M0A02MF4XR
0b.11.0 Not Owned NONE 50M0A01XF4XR
And also:
CLUSTER::*> node run -node node1 sasadmin shelf
Expanders on channel 0a:
+-----------------------------------------------------------------------+
0 | 0| 1| 2| 3| 4| 5| 6| 7| 8| 9|10|11|12|13|14|15|16|17|18|19|20|21|22|23|
+-----------------------------------------------------------------------+
+-----------------------------------------------------------------------+
11 | 0| 1|DD|DD|DD|DD|DD|DD|DD|DD|DD|DD|DD|DD|DD|DD|DD|DD|DD|DD|DD|DD|DD|DD|
+-----------------------------------------------------------------------+
The system is running on an older Ontap release (9.2P2).
Is there any command to „rescan“ the disk locations?
Best,
Alexander Griesser
Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail:
AGriesser@anexia-it.com
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt
Geschäftsführer: Alexander Windbichler
Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601