Actually it is probably more fool proof approach – just pretend you are replacing boot medium and follow procedure. 7G and Data ONTAP 8 are sufficiently different, what with extra /var and so on, so netbot may not function as it did before.

---

Sent from my Fujitsu LIFEBOOK S937

With best regards

Andrei Borzenkov

Senior System Engineer

FJ EMEIA PR FOCP RU SM FSO

FUJITSU

Savvinskaja river bank, bld 11, floor 6,

BC “Savvinskaja 11”, 119435,

Moscow, Russia

Tel.: +7 (495) 730 6220 ext. 2247

Mob.: +7 (916) 678 7208

E-mail: Andrei.Borzenkov@fujitsu.com

Web: ts.fujitsu.com

Company details: OOO Fujitsu Technology Solutions / ts.fujitsu.com/imprint

This communication contains information that is confidential, proprietary in nature and/or privileged.  It is for the exclusive use of the intended recipient(s). If you are not the intended recipient(s) or the person responsible for delivering it to the intended recipient(s), please note that any form of dissemination, distribution or copying of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender and delete the original communication. Thank you for your cooperation.

Please be advised that neither Fujitsu, its affiliates, its employees or agents accept liability for any errors, omissions or damages caused by delays of receipt or by any virus infection in this message or its attachments, or which may otherwise arise as a result of this e-mail transmission.

From: Toasters <toasters-bounces@teaparty.net> On Behalf Of Tim McCarthy
Sent: Thursday, February 4, 2021 4:24 PM
To: Carl Howell <chowell@uwf.edu>; toasters@teaparty.net
Subject: Re: 7-mode upgrade mismatch

Probably the best thing to do is call support 🤓

If I were to try something I would not the node to the bot menu. I think there is an option to install software. 

Been a while. I may be wrong

Get Outlook for iOS

---

From: Toasters <toasters-bounces@teaparty.net> on behalf of Carl Howell <chowell@uwf.edu>
Sent: Thursday, February 4, 2021 8:21 AM
To: toasters@teaparty.net
Subject: 7-mode upgrade mismatch

I have a 3240 cluster with node A running 8.2.5P5 and node B running 8.1.4P9. Node A was upgraded to 8.2.5P5 and giveback was performed from node B. Takeover of node B by node A was performed, and both nodes are now running on node A. But, node B was not upgraded to 8.2.5P5 before the takeover and now when we attempt to giveback to node B so that it can be upgraded, it panics. 

So, node A running 8.2.5P5 in takeover mode. Node B running 8.1.4P9 has been taken over by A. How can we get B upgraded to 8.2.5P5? 

Thanks,

--Carl