Hmm… how did you find out that this was the reason for the LED?
Both filers in question are not having any external shelves – just the disks in the controller and for the 2650, there’s not really much I could have done wrong.
Filer1:e0a -> filer2:e0a (cluster)
Filer1:e0b -> filer2:e0b (cluster)
Filer1:0a -> filer2:0b (sas)
filer1:0b -> filer2:0a (sas)
No ACP cabling on the FAS2650 anymore, so that’s about it I guess…
Alexander Griesser
Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail:
AGriesser@anexia-it.com
Web:
http://www.anexia-it.com
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt
Geschäftsführer: Alexander Windbichler
Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
I have found that this can be caused if shelf cabling is not meeting "best practices". I had this issue with 6280's once we upgraded to 8.2.x. The loops weren't spread out on different cards, or asics, or
something odd.
Hi there,
I have two filers (1x FAS2240 and 1x FAS2650) and both have the system attention LED lit and I have no idea why.
`System health status show` as well as config advisor are both A-OK and there are no visible indicators why this LED is still lit.
Any idea how to find out the root cause of this LED on the front bezel or how I can check or maybe reset the status of the LED through CLI?
Thanks,
Alexander Griesser
Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail:
AGriesser@anexia-it.com
Web:
http://www.anexia-it.com
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt
Geschäftsführer: Alexander Windbichler
Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601