Data ONTAP 8.x changes the default communications security model from unsecure to secure.  So, http is disabled for FilerView and ssl (https) is enabled, rsh is disabled ssh is enabled, etc.  Try using https://filername/na_admin.  If you have trouble with that, a potential problem could be corporate GPO’s if you’re in a Windows environment.  One we ran into in our test environment was a mandatory policy that requires using TLS vice SSL.  Data ONTAP 8.0.x does not support TLS.

From: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of steve klise
Sent: Wednesday, August 31, 2011 9:11 PM
To: toasters@teaparty.net
Subject: 8.0.2p1

Figured I would ask the crowed this one...

I have a current issue with a version of ontap (8x) and we have been working with support to reproduce in our lab and at Netapp (NDMP is not working with some of our vols).  Make a long story short, the filer (FAS6030) was running 7.3x, upgraded to 8.01p2, then we ran our test; it failed, I reverted to 7.x unsuccessfully (didn't RTFM going backwards... So it was bad).

I had to go on vaction and a Netapp SE came onsight to repair and get the filer back up to 8.x for the support folks.  I was not there, but the current filer is running is runnin OT 8.0.2p1 and I can do the normal console stuff, system manager, blah blah.

Problem:
filerview is not launching, and I don't think it ever has worked since 8.0.1p2.  I compared to another files options, and they all seemed in order.  I also ran the software download and rebooted.

What is strange is I can telnet to port 80, but I get a 404 errror.  I tried via IP, via ip/Na_filer, everything I can think of..

Its in the IO lab, so I can blast it... Any suggestions is appreciated..