-----Original Message-----
From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Robert Borowicz
Sent: Monday, November 08, 2004 10:20 AM
To: Netapp
Subject: snaprestore reboots the filer?

The following was lifted from the following doc url:

 

http://www.netapp.com/tech_library/3130.html#5.

 

My "Data Protection Guide" says only if you snap restore the root volume will the filer will reboot which makes sense to me. The following is from Section 5.1 of the above referenced doc. I think this is an error in the doc.

 

Can anybody confirm this for me?

 

Thanks

 

-Bob B.

 

 

*************************excerpt from URL doc********************************

Next, from the filer's console or a telnet connection, issue the following command:

vol snaprestore voldb -s new

A reboot of the filer will occur. After the filer has rebooted, you can start the database back up again:

"This message is intended only for the named recipient. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited."