Thanks!!
What is killing me is that I dont know how to check with OPM is even passing data to OCUM.
I followed the steps on linking them together, but how do I test?
Is this seriusly going to be end state and netapp will no longer have performance analytical tool?



On Monday, April 20, 2015 1:20 PM, "Weber, Mark A" <mark-a-weber@uiowa.edu> wrote:


I don’t think you can, plus no node level or cluster level view or aggregate, network…
 
What I do is setup OPM to send stats to graphite:
http://transitiontactician.com/?p=24
http://www.dburkland.com/how-to-setup-graphite-to-visualize-oncommand-performance-manager-data/
 
m
 
From: Iluhes [mailto:iluhes@yahoo.com]
Sent: Monday, April 20, 2015 1:00 PM
To: Weber, Mark A
Cc: Toasters
Subject: Re: what in the world happend to performance (dfm) advisor with CDOT
 
How do I see which volume is eating the performance?
Do I have to go through each volume manually via search?
 
 
 
On Monday, April 20, 2015 12:58 PM, Iluhes <iluhes@yahoo.com> wrote:
 
8.3 forces to use 6.2 right? So there is 5.x possibility. 
I will try searching, but it still seems significantly crippled, and I mean significantly.
Is anyone listening in netapp. They are pushing this CMOD so very much, and now what?
 
 
 
On Monday, April 20, 2015 12:38 PM, "Weber, Mark A" <mark-a-weber@uiowa.edu> wrote:
 
There isn’t feature parity with DFM yet.
To view IOPS/etc graphs, search for the volume/aggr/node using the search box in OPM (not OCUM)
 
m
 
From: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Iluhes
Sent: Monday, April 20, 2015 12:22 PM
To: Francis Kim
Cc: Toasters
Subject: Re: what in the world happend to performance (dfm) advisor with CDOT
 
I see nothing in OCUM, no performance graphs, no ability to drill into iops or anything...
I connected OCUM with perfromance manager and nothing I can find where I can see details on the performance like I would be able to get with Managemnt console and Performace advisor
 
 
 
 
On Monday, April 20, 2015 12:09 PM, Francis Kim <fkim@BERKCOM.com> wrote:
 
Did you check out OnCommand Unified Manager?  DFM has been rolled into OCUM. OCUM 6.1 and beyond is a CDOT-specific release.
 
Francis Kim | Engineer
510-644-1599 x334 | fkim@berkcom.com
 
BerkCom | www.berkcom.com
NetApp | Cisco | Supermicro | Brocade | VMware
 
On Apr 20, 2015, at 10:06 AM, Iluhes <iluhes@yahoo.com> wrote:
 
What happened? Where are all the performance graphs, they are all gone.
Did the tool get killed? The performance manager is almost empty
 
_______________________________________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters