I think I may just be looking at a limit of the system. If an aggregate is already assigned to one SVM, can it also be assigned to another? That is, can two different SVMs access the same aggregate?
Output:
netapp4::> vserver modify -vserver scharp_vm_storage
-aggr-list scharpdata,scharp_vm_storage
netapp4::> vserver show
Admin Operational Root
Vserver Type Subtype State State Volume
Aggregate
----------- ------- ---------- ---------- ----------- ----------
----------
netapp4 admin - - - - -
netapp4-a node - - - - -
netapp4-b node - - - - -
scharp_kube data default running running scharp_
scharpdata
kube_root
scharp_vm_storage
data default running running scharp_vm_
scharp_vm_
storage_
storage
root
scharpdata data default running running scharpdata
scharpdata
_root
6 entries were displayed.
netapp4::>
Something may be getting lost here. Are you able to send any output?
On Tue, Jul 7, 2020 at 4:47 PM Rue, Randy <randyrue@gmail.com> wrote:
I was misremembering from my early days in pre-cluster mode.
Forget any mention of disk ownership :)
Can an aggregate be used by more than one SVM? If so, how? When I try to
add the aggregate to the other SVM, the command returns without error
but vserver show still shows the SVMS and their assigned aggregates
unchanged.
On 7/7/2020 12:10 PM, John Stoffel wrote:
> Randy,
> Check your configuration, you need to assign the aggregates to the
> vservers.
>
>
>
> https://library.netapp.com/ecmdocs/ECMP1196912/html/GUID-5255E7D8-F420-4BD3-AEFB-7EF65488C65C.html
>
> shows you the steps to take.
>
> vserver show -fields aggr-list
>
> vserver modify -vserver <vserver> -aggr-list <aggr1>,<aggr2>[,aggrN]
>
> John
_______________________________________________
Toasters mailing list
Toasters@teaparty.net
https://www.teaparty.net/mailman/listinfo/toasters