Also, if your system has a support contract and sends regular ASUPs to NetApp,
you can open a case and request an filer upgrade plan.  They can generate one based
on your filer's config.
 

-- Adam Fox
adamfox@netapp.com

 

From: owner-dl-toasters@jhereg.corp.netapp.com [mailto:owner-dl-toasters@jhereg.corp.netapp.com] On Behalf Of Parisi, Justin
Sent: Thursday, March 08, 2007 2:40 PM
To: Brent Ellis
Cc: toasters@mathworks.com
Subject: RE: Upgrading Data OnTap

Use this link as a guide...
 
http://now.netapp.com/NOW/knowledge/docs/ontap/rel712/html/ontap/upgrade/4ug_sw.htm
 
 

From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of Brent Ellis
Sent: Thursday, March 08, 2007 1:26 PM
To: Brent Ellis
Cc: toasters@mathworks.com
Subject: Re: Upgrading Data OnTap

Thanks for everyone's responses, it sounds like the really important thing I was missing was the download part.  I may setup a web folder with upgrades however to facilitate this process in the future.  The main thing I was worried about is that my configuration will be the same after I am done upgrading.

If anyone is curious, I am upgrading because while we were testing Wista we found that name resolution doesn't work to access the filer for the version of Data Ontap we have installed.  According to the NOW website this problem was fixed in subsequent 7.1.x releases.

Brent Ellis
Computing Services Group
Boston University
617-358-2486
interi@bu.edu
cashelp@bu.edu




On Mar 8, 2007, at 11:49 AM, Brent Ellis wrote:

I would like to upgrade my filer from data ontap 7.1p1 to 7.1.2 and I just want to make sure I am doing it write.

I plan on doing the following:

1. disable the cluster
2. mount the c$ share as a drive
3. run the 7.1.2 installer
4. reboot
5. repeat with the other cluster partner
6. enable the cluster.

Does that sound right?  It seems a little to easy to me

Brent Ellis
Computing Services Group
Boston University
617-358-2486