Hi all,

We recently purchased a NetApp FAS-2554 and I'm getting what I feel is less than stellar performance.  I have a case open with support.  But I'm trying to 'calibrate my expectations' a bit, so I thought I'd send this out to the list.  Any feedback would be appreciated.

Here's a some info about the configuration
cDOT, 8.3.1RC1
2-node switchless cluster
22 SATA drives (3TB) in two RAID-DP aggregates + 2 spares
22 10K SAS drives (900GB) in two RAID-DP aggregates + 2 spares
No flash (yet?)
10Gb cluster interconnect
10Gb to server(s) with jumbo frames
2 vFilers - the one under test has a volume on the sas_data_1 aggregate which is serving NFS v3 (TCP)

I'm currently testing with a Cisco UCS C220 M4S running CentOS 6.6 as the NFS client.  We noticed that performance (on a database load) seemed poor, so I started some benchmark testing with "iozone".  The test I'm looking at in particular is sequential writes with an 8K record size.  The write throughput was 2MB/S!  There are no other workloads on the filer or the server.

NetApp suggested a workaround for the bug described here:
http://mysupport.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=876563
and that actually improved things - my sequential write throughput test can now do 15MB/S.  Definitely better, but that still seems slow to me.

So with all that background here is my question - does anyone have a similar configuration out there, and what sort of write speeds are you seeing?  I'm just looking for a sanity check.  Is 15MB/S reasonable?

Thanks!

Roy McMorran