*** Before acting on this e-mail or opening any attachment you are advised to read the disclaimer at the end of this e-mail ***
-----Original Message-----
As far as I'm concerned, this is an urban legend :-) I use UDP v3 on
Solaris with NetApp, and I've always had a good performance, no worse
than Linux or HPUX. When you say you experienced it yourself, what
exactly did you see? Was it reproducible with iozone? What were the
numbers?
-----Original Message-----In our environment, YMMV, Solaris (100mb) to NetApp (100mb) works fine over
UDP. Solaris (100mb) to NetApp (gigabit) was horribly slow for certain operations.
Normal file reads were fine, but a compare (`cmp`) of two files from the same filer
were unbelievably slow. A cmp that would take 15 seconds to the 100mb interface of
the NetApp would take an hour or more to the gigabit interface. To get Sun to actually
admit it was their problem, we did a Solaris (100mb) to Solaris (gigabit) test over UDP,
and it took 5minutes or so. Not as bad as to NetApp, but bad enough for them to file a
bug, which Sun Engineering ignored since there is a work-around (use TCP or the 100mb
interface of the filer). This was with Solaris 8. Solaris 7 did not have this problem
in our environment.Since nearly all our clients are 100mb, and only our QA group was running into this,
we set their automount entries to point to the 100mb interface.John
******************************* Disclaimer *****************************
Confidentiality: This e-mail and any attachments are intended for the
addressee(s) only and may be confidential. If they have come to you in
error you must take no action based on them, nor must you copy or show
them to anyone; please reply to this e-mail and highlight the error.
Viruses: Although we have taken steps to ensure that this e-mail and
attachments are free from any virus, we advise that in keeping with good
practice the recipient should ensure they are actually virus free.
********************** http://www.burallplastec.com ********************