Mike,

I am thinking that maybe the issue is in one of the counter names based on the error you are receiving since it is not saying the command is not recognized.

If you run the command without the counters specified (just 'statistics show-periodic') does that work?  If so, there might be something going on with the counter names on that system.

Thank you,
Tim

From: Toasters <toasters-bounces@teaparty.net> on behalf of Sebastian Goetze <spgoetze@gmail.com>
Sent: Friday, October 22, 2021 4:03 AM
To: Potocky Miroslav <miroslav.potocky@cern.ch>; toasters@teaparty.net <toasters@teaparty.net>; Mike Thompson <mike.thompson@gmail.com>
Subject: Re: statistics show-periodic
 

Just checked on my 9.7p4 sim:

statistics show-periodic in general seems to be broken. Whatever the counters, whether in Adv or Diag mode it can't find the command and gives the exact error Mike mentioned.

I checked Bugs Online and the only Bug that's show-periodic related was
https://mysupport.netapp.com/site/bugs-online/product/ONTAP/BURT/1307631

(Apparently still in 9.7p10 and fixed in p11)


My 2c


Sebastian


On 22.10.2021 08:40, Potocky Miroslav wrote:

Seems to work fine on 9.7P11. Maybe a more recent change?

XXXX::> set -privilege advanced

Warning: These advanced commands are potentially dangerous; use them only when directed to do so by NetApp personnel.
Do you want to continue? {y|n}: y

XXXX::*>  statistics show-periodic -counter total-recv|total-sent|data-recv|data-sent|cluster-recv|cluster-sent|cluster-busy
XXXX: cluster.cluster: 10/22/2021 08:36:25
    total    total     data     data cluster  cluster  cluster
     recv     sent     recv     sent    busy     recv     sent
 -------- -------- -------- -------- ------- -------- --------
   2.91GB   4.08GB    735MB   2.09GB     51%   2.19GB   1.99GB
   3.19GB   4.79GB    836MB   2.34GB     40%   2.37GB   2.44GB
XXXX: cluster.cluster: 10/22/2021 08:36:30
    total    total     data     data cluster  cluster  cluster
     recv     sent     recv     sent    busy     recv     sent
 -------- -------- -------- -------- ------- -------- --------
Minimums:
   2.91GB   4.08GB    735MB   2.09GB     40%   2.19GB   1.99GB
Averages for 2 samples:
   3.05GB   4.43GB    786MB   2.22GB     45%   2.28GB   2.22GB
Maximums:
   3.19GB   4.79GB    836MB   2.34GB     51%   2.37GB   2.44GB


XXXX::*> version
NetApp Release 9.7P11: Tue Jan 12 23:00:49 UTC 2021

Regards,
MP
On 22. 10. 2021 7:48, Mike Thompson wrote:

can't seem to get this to work on a 9.7 box.   works fine on 9.3

am I missing something obvious?

pd-san2::*> set -privilege advanced

pd-san2::*> statistics show-periodic -counter total-recv|total-sent|data-recv|data-sent|cluster-recv|cluster-sent|cluster-busy

Error: command failed: entry doesn't exist

pd-san2::*> set -privilege diag

Warning: These diagnostic commands are for use by NetApp personnel only.
Do you want to continue? {y|n}: y

pd-san2::*> statistics show-periodic -counter total-recv|total-sent|data-recv|data-sent|cluster-recv|cluster-sent|cluster-busy

Error: command failed: entry doesn't exist

pd-san2::*> version
NetApp Release 9.7P13: Thu Apr 15 02:06:46 UTC 2021

_______________________________________________
Toasters mailing list
Toasters@teaparty.net
https://www.teaparty.net/mailman/listinfo/toasters

_______________________________________________
Toasters mailing list
Toasters@teaparty.net
https://www.teaparty.net/mailman/listinfo/toasters