-----Original Message-----
From: Kiernan, Michael [mailto:mkiernan@netapp.com]
Sent: Tuesday, December 10, 2002 9:13 AM
To: 'Alex Harkema'
Subject: RE: Suse & NetApp break oracle: flock problem

Hi Alex,

 

can you post details on the polyserve-flock patch?  (a couple of minutes on Google failed to find it...)

 

Thanks,

Mike

-----Original Message-----
From: Alex Harkema [mailto:HarkemaA@vertis.nl]
Sent: Monday, December 09, 2002 8:04 PM
To: Kiernan, Michael
Subject: RE: Suse & NetApp break oracle: flock problem

Indeed it was what I was looking for. Thanks!

Meanwhile, my cry for help activated some suse-people; I'm now awaiting their responses on the locking problem.

 

Alex

-----Original Message-----
From: Kiernan, Michael [mailto:mkiernan@netapp.com]
Sent: Monday, December 09, 2002 5:44 PM
To: 'Alex Harkema'
Subject: RE: Suse & NetApp break oracle: flock problem

Hi Alex,

 

look under the partners section on the website:

http://www.netapp.com/partners/oracle/9irac.html

 

whitepaper:

http://www.netapp.com/tech_library/3164.html

 

hope that's what you're looking for...

 

Mike

-----Original Message-----
From: Alex Harkema [mailto:HarkemaA@vertis.nl]
Sent: Monday, December 09, 2002 5:33 PM
To: Kiernan, Michael
Cc: 'toasters@mathworks.com'
Subject: RE: Suse & NetApp break oracle: flock problem

Mike,

 

thank you for your reply.

I really suspect this is a linux-(kernel)problem. However I was curious if anyone had encountered the same issue. Besides that, we had not rebooted the machine when the error occurred. At the moment installations are running on the linux box (now still running the 2.4.18.-134 kernel, this one *not* containing the polyserver-flock patch) and I don't have the opportunity to reboot that one.

 

However, I'll gladly send you the dumps afterward if we're still experiencing same problems.

 

Can you tell me were I can find certifications for the oracle-on-linux/netapp products?

Like, is 9iRac certified on Netapp?

 

tia,

Alex

-----Original Message-----
From: Kiernan, Michael [mailto:mkiernan@netapp.com]
Sent: Monday, December 09, 2002 2:09 PM
To: 'Alex Harkema'
Cc: Rolf Fokkens
Subject: RE: Suse & NetApp break oracle: flock problem

Hi Alex,

 

What did 'priv set advanced; lock_dump -h' show on the filer at the time you get the error ?

 

Was Oracle shutdown cleanly prior to reboot ? One problem we're aware of with Linux rpc.statd

is  that it sometimes can fail to remove the locks on the filer on reboot, due to it locking with

an unqualified nodename, and sending lock recovery packets with a fully-qualified domain name.

If Oracle shutdown cleanly, however, the locks should have been released by that action.

 

A pktt trace from the filer to the linux box (pktt start all -i <ip of oracle linux box>) while you

reboot the upgraded box and restart oracle would be useful, as would the lock_dump output.

 

I'll be happy to look at the data.

 

Mike

 

-----Original Message-----
From: Alex Harkema [mailto:HarkemaA@vertis.nl]
Sent: Monday, December 09, 2002 1:24 PM
To: 'toasters@mathworks.com'
Cc: Rolf Fokkens
Subject: Suse & NetApp break oracle: flock problem

Hi all!

After upgrading the Linux kernel on our SuSE Linux Enterprise Server (SLES) to k_smp-2.4.18-224 we were unable to start our Oracle Database which was located on a NetApp Filer.

All the feedback we got was "no locks available" Further investigation showed that k_smp-2.4.18-224 introduced a polyserve-flock patch which probably causes the problems. Has anyone ran into this?

We'll do tests with k_smp-2.4.18-224 and/or 2.4.18-237 whithout the polyserve-flock patch and share this with those who express their interest.

I address this report to both SuSE and NetApp for it's this combination that breaks Oracle. Because it's both in SuSE's and NetApp's interest I hope this report is appreciated though it may not have been sent through the proper channels.

Alex Harkema
Vertis