Its set to on by default in all versions of ONTAP.
Theres no good reason to disable it. If you system got "busy" the CM engine drops samples..it effectively turn itself off, as needed.
Not that I know of. I'll have to check our other filers. I'm assuming that should be set?
Sent from my iPhoneDid you recently change the performance data option ?
That's the once that writes to the cm file
--
Sent from my Android phone with K-9 Mail. Please excuse my brevity.Dan Finn <dan_j_finn@yahoo.com> wrote:filer> options autosupportautosupport.cifs.verbose offautosupport.content complete (value might be overwritten in takeover)autosupport.doit DONTautosupport.enable on (value might be overwritten in takeover)option autosupport.from: can not be read, command terminated (code=0xffffffff)autosupport.from unknown (value might be overwritten in takeover)autosupport.local.nht_data.enable off (value might be overwritten in takeover)autosupport.local.performance_data.enable off (value might be overwritten in takeover)autosupport.mailhost mail-relay-server (value might be overwritten in takeover)autosupport.minimal.subject.id hostname (value might be overwritten in takeover)autosupport.nht_data.enable on (value might be overwritten in takeover)autosupport.noteto (value might be overwritten in takeover)autosupport.partner.to (value might be overwritten in takeover)autosupport.performance_data.doit DONTautosupport.performance_data.enable on (value might be overwritten in takeover)autosupport.periodic.tx_window 1h (value might be overwritten in takeover)autosupport.retry.count 15 (value might be overwritten in takeover)autosupport.retry.interval 4m (value might be overwritten in takeover)autosupport.support.enable on (value might be overwritten in takeover)autosupport.support.proxy (value might be overwritten in takeover)autosupport.support.to autosupport@netapp.com (value might be overwritten in takeover)autosupport.support.transport https (value might be overwritten in takeover)autosupport.support.url support.netapp.com/asupprod/post/1.0/postAsup (value might be overwritten in takeover)autosupport.throttle on (value might be overwritten in takeover)autosupport.to myemail@domain.com (value might be overwritten in takeover)
From: Chaim Rieger <chaim.rieger@gmail.com>
To: Dan Finn <dan_j_finn@yahoo.com>; "toasters@teaparty.net" <toasters@teaparty.net>
Sent: Thursday, March 15, 2012 4:13 PM
Subject: Re: Strange error when running autosupport.doit
Options autosupport please
--
Sent from my Android phone with K-9 Mail. Please excuse my brevity.Dan Finn <dan_j_finn@yahoo.com> wrote:I noticed that when I run an autosupport.doit I get the following error:Thu Mar 15 15:39:16 MDT [na04: asup.general.file.create.failed:error]: AutoSupport file (/mroot/etc/log/.cm_stats_hourly_done) was unable to be written to the file spool subdirectory.
But the autosupport email still makes it out and looks good. I deleted everything under /etc/log/autosupport and I also tested that I could create the file that is mentioned in the error manually as root, no issues there.Anyone else ever seen this before?
_______________________________________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters