Oscar,
 
You'll need to look at the System Configuration Guide on now.netapp.com for a C720 for the version of NetCache you are running to confirm compatability. I just tried to look for you but that part of the site appears to be down at the moment.
 
Having said that, I'm sure any of the adapters you listed will work just fine, if what you are getting at is that you have those in stock and you're not sure which one to use.
 
If you are suggesting using a non-NetApp adaptor, you need to look at the chipset on the NetApp adapter and find another OEM card with the same chipset. i.e. the X1001B is a common Znyx adapter.
 
However, there are two issues with doing this:
 
1) The firmware on your substitute adaptor may no be the same as the one from NetApp, so it may not work correctly.
2) You will violate your NetApp hardware maintenance contract by using a third-party product inside the box.
 
I do know that the NetApp X1025B gigabit ethernet adaptor is a stock standard Intel Pro1000 which is fully interchangeable, i.e. you can use the NetApp card in a Windows or Linux box and it will work just fine and the regular Intel 8940PWL will work just fine in a Filer (at about a third of the price you would have to pay NetApp for it!). We often use the original Intel card in NetApp boxes in our test labs. However, issue (2) above still applies, so we would never recommend any of our customers do this in a live environment.
 
regards,
 

Alan McLachlan
Senior Systems Engineer
Storage Management Solutions

ASI Solutions
www.asi.com.au
Ph +61 2 6230 1566
Fax +61 2 6230 5343
Mobile +61 428 655644
e-mail amclachlan@asi.com.au

 
-----Original Message-----
From: Oscar Rodriguez Hernandez [mailto:orh@satec.es]
Sent: Friday, 29 November 2002 8:46 PM
To: toasters@mathworks.com
Cc: Jose Luis Jimenez Fernandez; Jose Sanchez
Subject: Network Adapters for Netcache C720

Hello
 
We currently have one C720 Netache unit. We need to have this unit more than one Ethnernet port, and at our local stock we have many different types of Network Adapters, and we would like to know if we could use one of those instead of buying a new one.
 
The network adapters fort C720 are the following NetApp P/N:
 
Single-port 10Base-T/100Base-TX:
 
P/N X1001B*
P/N X1001C
 
Quad-port 10Base-T/100Base-TX
P/N X1012B*
P/N X1012C

Does anyone know which network card (manufacturer, model) are those P/N for? Has anyone used succesfully any different network adapter not from NetApp for the NetCache C720 unit?
 
Thanks.
 
Oscar.
 


**** ASI Solutions Disclaimer ****

The material transmitted may contain confidential and/or privileged material and is intended only for the addressee. If you receive this in error, please notify the sender and destroy any copies of the material immediately. ASI will protect your Privacy according to the 10 Privacy Principles outlined under the new Privacy Act, Dec 2001.


This email is also subject to copyright. Any use of or reliance upon this material by persons or entities other than the addressee is prohibited.


E-mails may be interfered with, may contain computer viruses or other defects. Under no circumstances do we accept liability for any loss or damage which may result from your receipt of this message or any attachments.

**** END OF MESSAGE ****