You can change either to the other. The idea is to get them to match, so it doesn't matter which one. I believe there will be an outage. I would not recommend trying it while serving live data. I cannot comfortably tell you to do a failover to change it either.
Stetson M. Webster
Professional Services Engineer
NCIE-SAN, NCIE-B&R, SNIA-SCSE
NetApp Global Services - Southeast District919.250.0052 Mobile
Stetson.Webster@netapp.comLearn how: netapp.com/guarantee
From: Linux Admin [mailto:sysadmin.linux@gmail.com]
Sent: Saturday, January 31, 2009 11:53 PM
To: Webster, Stetson
Cc: NetApp Toasters List
Subject: Re: Local FCP nodename does not match the cluster partner's FCP nodename.
Stetson,
Thanks!!!!
Quick follow up to you and the group:
It says:
In such a case, the user must run an "fcp nodename" command on the partner and
obtain the partner's nodename. Update the local head's nodename (WWN) with the
partner's nodename using the "fcp set nodename WWN". Then, verify that it is
set with "fcp nodename" on the local head. Then run "fcp start" to start the fcp
service.
netapp01> fcp nodename
Fibre Channel nodename: 50:xx:xx:xx:xx:xx:xx:xxnetapp02> fcp nodename
Fibre Channel nodename: 50:yy:yy:yy:yy:yy:yy:yy
Which one do I set with "fcp set" command: netapp1 and netapp2. Does it cause outage?
(fcp start?)
On Sat, Jan 31, 2009 at 10:42 PM, Webster, Stetson <Stetson.Webster@netapp.com> wrote:
Try this:
http://now.netapp.com/NOW/cgi-bin/bol?Type=Detail&Display=202390
Stetson M. Webster
Professional Services Engineer
NCIE-SAN, NCIE-B&R, SNIA-SCSE
NetApp Global Services - Southeast District919.250.0052 Mobile
Stetson.Webster@netapp.comLearn how: netapp.com/guarantee
From: Linux Admin [mailto:sysadmin.linux@gmail.com]
Sent: Saturday, January 31, 2009 11:23 PM
To: NetApp Toasters List
Subject: Local FCP nodename does not match the cluster partner's FCP nodename.
Ho folks
What does this error means and how do I remedy it?