Subject: RE: NetApp 8.0.2 7-mode - update to 8.1.2.
Just my 2 cents.. Not sure if it is written in the doc, but when you do a fail over to the partner, and you have FC type luns, wait at least 10 minutes before failing back over. Also, we usually update the firmware on the disk/shelves prior.
Stop all snapmirrors or just turn it off so nothing is in transit during maintenance. I make a copy of the /ETC for safe keeping, and if you have CIFS, I usually export my shares.. We follow to doc and are usually good with the upgrades.
Good luck, and may the DOT force be with you.
> Date: Wed, 6 Feb 2013 08:45:00 +0100
> Subject: NetApp 8.0.2 7-mode - update to 8.1.2.
> From:
radecki.rafal@gmail.com
> To:
Toasters@teaparty.net
>
> Hi All.
>
> I have a FAS3210 appliance with NetApp 8.0.2. I would like to update
> it to 8.1.2. In
http://support.netapp.com/ (My AutoSupport) I see
> there is a "Upgrade Advisor" section. There is a step-by-step howto.
> But are there any good documents about updating this software? I would
> like to make as few mistakes as possible, I will do it for the first
> time ;)
>
> Best regards,
> Rafal Radecki.
> _______________________________________________
> Toasters mailing list
>
Toasters@teaparty.net
>
http://www.teaparty.net/mailman/listinfo/toasters