I’m never sure how much you can trust the simulator with hardware related things like these and I do not have spare gear at hand here
to try it myself :-/
I’ll see if I can dig something up and will try it on a physical system too, then.
Thanks,
Alexander Griesser
Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail:
AGriesser@anexia-it.com
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt
Geschäftsführer: Alexander Windbichler
Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
Von: tmac [mailto:tmacmd@gmail.com]
Gesendet: Dienstag, 18. April 2017 14:41
An: Alexander Griesser <AGriesser@anexia-it.com>
Cc: toasters@teaparty.net
Betreff: Re: Add new ports to interface groups
That might work.
If I get a chance, I will try on a simulator today.
On Tue, Apr 18, 2017 at 7:02 AM, Alexander Griesser <AGriesser@anexia-it.com> wrote:
Yah, that’s what I thought needs to be done, but that’s a bit cumbersome given the fact that there are like 100 VLANs configured on a0a and I need to update all broadcast domain memberships, etc. too – and I can only remove the VLAN ports if they’re not configured as home ports on any lifs I guess, to quite some fiddeling would be involved here.
What I’m looking for basically is something like disable a0a, remove all 10g ports, so I will end up with an empty a0a but all the VLANs on top of it will still be there, then halt the node, add the 40G adapter, add its ports to a0a -> done.
Would that work or am I overlooking something obvious?
Best,
Alexander Griesser
Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.com
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt
Geschäftsführer: Alexander Windbichler
Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
Von: Tim McCarthy [mailto:tmacmd@gmail.com]
Gesendet: Dienstag, 18. April 2017 12:59
An: toasters@teaparty.net; Alexander Griesser <AGriesser@anexia-it.com>
Betreff: Re: Add new ports to interface groups
If you fail the a0a over to another node, making sure auto fall back is disabled, then destroy the a0a on the node, halt it, remove the 10g card, replace with the 40g card and recreate a0a with its vlans. Then you should be able to fall back.
Spelling errors courtesy of Swype for iOS...
Tim McCarthy, Consultant at Presidio
From: toasters-bounces@teaparty.net <toasters-bounces@teaparty.net> on behalf of Alexander Griesser <AGriesser@anexia-it.com>
Sent: Tuesday, April 18, 2017 6:50:31 AM
To: toasters@teaparty.net
Subject: Add new ports to interface groups
Hey there,
I’m currently thinking about upgrading some of my filers from 10G to 40G interfaces. This would involve pulling out the 10G card and inserting the 40G card, so one halt per node is necessary, which isn’t really the problem.
I’m just a bit unsure of the best way to move my a0a ifgrp to the new ports – I remember that in the past when you wanted to switch the ifgrp to a different portspeed, you had to recreate it completely which is a bit cumbersome due to all the VLANs built on top of it – has that changed?
If I issue a takeover of the first system and replace the card, it will probably boot up with a broken ifgrp configuration since it cannot find the physical ports in the ifgrp anymore and I’m looking for the best way to do a physical port upgrade like this now, so if anyone has gone through that already, feedback would be greatly appreciated.
Best,
Alexander Griesser
Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.com
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt
Geschäftsführer: Alexander Windbichler
Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601