Does anyone know how to get, or make, or create a VMDK (FC) LUN to be optimized? I didn’t read it in the admin guide, or release notes. I have created a new lun viaNetapp/vshpere plugin; tried to use an existing lun, created a new lun etc. Every instance we see the lun as not optimized.
· Using DOT 7.3.3p2
· 6040’s HA
· FC license
· All luns are set to ALUA/yes
· Vshpere is 5 and running esxi5 and esx4.x on the hosts
From: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Fletcher Cocquyt
Sent: Thursday, April 12, 2012 6:25 PM
To: steve klise
Cc: cruxrealm@aol.com; toasters@teaparty.net
Subject: Re: VSC 4 and online alignment - anyone used it in anger?
I'm frustrated they seemed to have released it before its done - see my post from 2 weeks ago
"VSC 4 missing VAAI and getting no VMs for aligned/not aligned"
Are people successfully using it to align VMs ?
We aligned all our VMs over a year ago when Netapp cited it as a prereq for helping us solve a latency issue.
I forget how I found out about VSC 4.0 - but I usually get this info from RSS feeds of blogs.
If the online alignment is production ready I can't believe they didn't tell folks earlier this was in the pipeline since it would save folks TONS of downtime we went through last year.
I remember asking back in June 2009 about "Adding VM re-alignment to SVMotion - which API?"
at that time the APIs were not there…
On Apr 12, 2012, at 5:17 PM, steve klise wrote:
This maybe off topic, but I am a bit frustrated here.
Is there anyway ANYONE knows of a way one becomes abreast of new updates to Netapp software one has purchased? We have someone doing re-alignments during the late evening taking downtime to re-align these windows 2003 vms.
Any help is appreciated.
BTW, thanks Peta for posting this. This is my current method of knowing what's out there and what others are doing.
> From: cruxrealm@aol.com
> Subject: Re: VSC 4 and online alignment - anyone used it in anger?
> Date: Wed, 11 Apr 2012 19:47:53 -0700
> To: petathames@gmail.com
> CC: Toasters@teaparty.net
>
> I suggest do it by batches and run in on quiet times. Also make sure you have ample space for VM snapshots.
>
> Sent from my iPad
>
> On Apr 11, 2012, at 7:26 PM, Peta Thames <petathames@gmail.com> wrote:
>
> > Hi all,
> >
> > I've been testing the new functionality in VSC 4 around online
> > re-alignment. I've done some tests with a test datastore and test VM
> > under load, all fine.
> >
> > However I have an estate of over 200 datastores. Has anyone run the
> > scan manager across all their datastores at once? Was there any
> > noticeable impact to the VMs? As far as I can tell, I can only
> > schedule the scan to scan everything at once. I know I could manually
> > do batches but I need to run the scans overnight.
> >
> > I've found documentation around the actual online alignment function
> > and warnings to not do too many at once, but nothing about the scan.
> > There also seems to be no way of stopping the scan once it starts,
> > which makes my rollback plan in my CR for this scan a bit empty
> > looking and hard to justify.
> >
> > And a long shot, just out of curiosity, if anyone has any information
> > on what the scan actually does would be interesting too. I can see it
> > takes a VM snapshot for each VM in the datastore, then deletes it, but
> > that's it. I've searched NOW high and low, but documentation on VSC 4
> > is pretty thin on the ground.
> >
> > Thanks,
> > Peta
> > _______________________________________________
> > Toasters mailing list
> > Toasters@teaparty.net
> > http://www.teaparty.net/mailman/listinfo/toasters
>
> _______________________________________________
> Toasters mailing list
> Toasters@teaparty.net
> http://www.teaparty.net/mailman/listinfo/toasters
_______________________________________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters