Has anyone working a Filer with a FC tape adapter (X2051A) with a IBM 3583 in SAN Brocade enviroment?
I trying without success to connect to Bridge FC/SCSI in IBM 3583 from FC tape adapter in Filer825 which send the following error messages.
Any information will be apreciated

 

Fri Oct 24 11:58:53 ART [rc:notice]: Onlining Fibre Channel adapter 1a.

Fri Oct 24 11:58:53 ART [ispfc_init_0:error]: Nameserver request GID_FT

from Fibre Channel adapter 1a failed: (0x8001, 0x9, 0x7) Server unable to perform operation. FC-4 types not registered.

Fri Oct 24 11:58:53 ART [ispfc_init_0:error]: Nameserver request GNN_FT

from Fibre Channel adapter 1a failed: (0x8001, 0x9, 0x7) Server unable to perform operation. FC-4 types not registered.

Fri Oct 24 11:58:53 ART [ispfc_init_0:error]: Note: Interrogation of SAN visible from Fibre Channel adapter 1a shows no SCSI devices attached to this fabric.

Fri Oct 24 11:58:53 ART [ispfc_init_0:notice]: Fibre Channel adapter 1a now online

F825 ONTAP 6.4.2P6 (FC card X2051A)

 

IBM 3583

2 - IBM ULT3580-TD1 25D4

1 - IBM ULT3580-TD1 36U3

 

Brocade Silkworm 3200 (fw 3.0.2c)