On 29 Sep 2008, at 16:36, Ed Wilts wrote:

From what I've heard, you can use TOE but only in an active/passive configuration. So if you have 2 10GigE ports on your card with each going to a separate switch, as long as you only use 1 active path at a time, you'll be fine. You'll have full failover and TOE, but you won't have 20GigE of bandwidth available.

On Mon, Sep 29, 2008 at 9:34 AM, Page, Jeremy <jeremy.page@gilbarco.com> wrote:
What an unfortunate fix :(

I'd very much like to use TOE on my 10gig VIF, does anyone know if this
is ever going to be supported, or is there an architectual reason why it
won't work?

Just for clarification if I have TOE turned on with 10G ethernet my units stop serving data with no cluster failover occurring.

At least with 7.2.5.1 with TOE turned off the units appear to be stable previously they where unstable whether TOE was active or not.