Thanks, Andrey – I’m happy that it’s not just me being unable to do that but on the other side I find it strange that a simple operation like that is not possible in cDOT…

I will try my luck with snapmirror and see if that would help me get it going – for NDMP and snapmirror I will definitely have to note the LUN serials in before and restore them manually afterwards before bringing the LUNs offline; the problem with snapmirror or ndmp is just that it’s a copy process after all so it takes some time to complete (leaving alone the fact that I would also need the space for that) and I wanted to just quickly change the presenting vFiler for our customer in a short maintenance window – seems that the maintenance window will be a bit longer now :-/

Best,

Alexander Griesser

System-Administrator

ANEXIA Internetdienstleistungs GmbH

E-Mail: ag@anexia.at

Web: http://www.anexia.at

Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt

Geschäftsführer: Alexander Windbichler

Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601

Von: Borzenkov, Andrey [mailto:andrei.borzenkov@ts.fujitsu.com]
Gesendet: Dienstag, 29. Juli 2014 14:23
An: Alexander Griesser; toasters@teaparty.net
Betreff: RE: cDOT - Move Volume from vserver to another?

No. And if someone knows tricks how to do it - please share!

The only way is to use snapmirror (or ndmpcopy … although I’m not sure whether external ndmcopy handles LUN correctly, and there is no internal one …)

From: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Alexander Griesser
Sent: Tuesday, July 29, 2014 4:06 PM
To: toasters@teaparty.net
Subject: cDOT - Move Volume from vserver to another?

Hey there,

is it possible to move a volume from one vserver to another one on the same node and by using the same aggregate?

I can find plenty of possibilities to move a volume to a different physical node or aggregate, but not for what I want to do.

node01 -> aggr01 -> vFiler01 -> Volume01 -> LUN01

node01 -> aggr01 -> vFiler02 -> Volume01 -> LUN01

so basically, I want to „dismount“ Volume01 from „vFiler01“ and mount it on „vFiler02“ – is that possible at all?