Hi all,
The setting is in IE under the
security tab --> custom level --> User Authentication --> Automatic
logon with current username and password.
Thanks to Quin Qhong from
Netapp for helping me out here.
Thanks
Michael
From: owner-
Sent: Friday, 17 December 2004
8:46 PM
Cc:
Subject: Re: Netcache in
transparent mode
did you tried to connect to the adress :
http://user:passwd@netcache
i am not sure this works and can't make a test but lots of site enable that way
of doing this
the only problem is the passwd sent in clear
it would be better to use https
I am not sure if the Netcache can do this. What the customer wants is to
have is the Netcache (C1200 - running 5.5R5) in transparent mode as well
as reverse proxy (web accelerator).
No problems so far, but the customer also wants to block Windows 2000 AD
computers groups from accessing instant messaging. They also want to rsh the
ACL so that they can turn on and off different AD computer groups.
As far as I know this means we need to do a auth on HTTP in the ACL. When
I do this the browser is prompted for username and password (well is did after
I found the transparent Auth tick box :)). However the customer
does not want to be prompted but wants passthrough authentication. Can
this be done?
Any help/thoughts on this much is appreciated.
Thanks
--
|
Stéphane Bentebba |
|
||||
|
|
FPS France |
