Hi Tim,
Apologies on the other details, but you've assumed correctly anyway.
Was more interested to hear peoples experiences with it, as this is an SSD shelf serving a storage pool keen to make sure it doesn't go belly up.
Trying to get a more official answer from NetApp about it.
Will let you know how it goes.
Thanks
On 23 November 2017 at 13:32 tmac <tmacmd@gmail.com> wrote:You did not provide any other details...you want to remove from say 0a/0d stack and move to 1b/2c (or some other supported version).I think you could do one path at a time:remove 0d (wait 45 seconds) plug shelf into 1b (or another square port) (wait 45 seconds)Verify the shelf is onlineremove 0a (wait 45 seconds) plug shelf into 2c (or another circle port) (wait 45 seconds)Verify the shelf is on the new stack.I think, if I recall, after some Patch release on 8.2 somewhere, the hot-removal addition of the same shelf was fixed.Additionally, I think you could take it a bit further (with a few more commands):system node run nodeb storage disable adapter 0dsystem node run nodeb storage disable adapter 1bremove shelf from 0d, plug shelf into 1bsystem node run nodeb storage enable adapter 0dsystem node run nodeb storage enable adapter 1bsystem node run nodea storage disable adapter 0asystem node run nodea storage disable adapter 2cremove shelf from 0a, plug shelf into 2csystem node run nodeb storage enable adapter 0asystem node run nodeb storage enable adapter 2cOn Thu, Nov 23, 2017 at 7:58 AM, TAYLOR DANIEL <dantaylor@ntlworld.com> wrote:Hello,
We need to re-cable a shelf out of its current loop into a new one, just interested to know if anyone had done this without issue?
We want to do this non disruptively so keen to hear other peoples comments and thoughts on this and if possible without causing a panic.
Running 9.1P8.
Thanks
Dan
_______________________________________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters