Agreed, but it would be nice to have it all formatted pretty like, and right in front of my face  J

*presses the easy button*

From: Klinkner, Steve [mailto:Steve.Klinkner@netapp.com]
Sent: Friday, April 25, 2008 2:18 PM
To: Langdon, Laughlin T. (Lock); toasters@mathworks.com
Subject: RE: Submitting Suggestions to Netapp/CLI command builder

I realize this doesn't exactly match your request, but it turns out that virtually everything that FilerView does will end up in the auditlog (found in /etc/log/auditlog on the root volume).

The entries will be a mix of API calls and command invocations (although the APIs have close CLI equivalents, many FilerView actions happen via ManageONTAP APIs rather than commands these days).

So while this won't come out quite in the nice form you've illustrated, you might learn quite a bit by examining the auditlog to see what FilerView did to accomplish the tasks you've requested.

Steve

---

From: Langdon, Laughlin T. (Lock) [mailto:Langdon.Lock@Mayo.EDU]
Sent: Friday, April 25, 2008 1:42 PM
To: toasters@mathworks.com
Subject: Submitting Suggestions to Netapp/CLI command builder

How would one go about submitting a suggestion to NetApp?

I was thinking it would be nice, if while working in the Filer View GUI, your operations selected would build a command line “example”

Say for instance you wanted to make a new volume from the GUI.

You go to the volume section and you click Add.

The wizard pops up.

click next

Select your volume type (flexible)

click next

Name the volume (vol1)

Select language (en_US)

Decide if you want to use UTF-8 or not (no)

click next

select the aggregate (aggr0)

set your space guarantee (volume)

click next

choose volume size type (useable)

choose volume size (100GB)

set snapshot reserve (10%)

click next

now it shows all the options you picked in the text box.

Create New Volume

Volume Name: vol1

Aggregate Container: aggr0 (14TB, raid_dp,mirrored)

Volume Size: 100 GB

Snapshot Reserve: 10%

Language: English (US)  (en_US)

Space Guarantee: volume

I want it to add the command line example of all the choices you picked.  So it would look something like this

Create New Volume

Volume Name: vol1

Aggregate Container: aggr0 (14TB, raid_dp,mirrored)

Volume Size: 100 GB

Snapshot Reserve: 10%

Language: English (US)  (en_US)

Space Guarantee: volume

CLI Commands used :     vol create vol1 -l en_US aggr0 -s volume 100g

                                                snap reserve vol1 10

I couldn’t find a CLI command to specify if that 100GIG was useable or total space, but I hope you get what I’m going for.

This might help people become more proficient in the CLI interface, and also help build commands for scripting.

Thoughts, Ideas, comments?