Id you dont have anything plugged into the B ports on the FCAL cards in slots 7 and 8, you will see these errors, and they are normal.
 
If there IS something plugged into those ports, and you see this error, you may have a configuration/hardware issue you need to contact support on.
-----Original Message-----
From: Bui, Marcus [mailto:Marcus.Bui@aiminvestments.com]
Sent: Wednesday, April 16, 2003 4:11 PM
To: 'toasters@mathworks.com'
Subject: boot up error

Hi Toasters,

 

I have a F820 (6.3.1R1) which get FC error every during boot up.  But once the Filer is up, all volumes are available and can see all disks.  Do 'sysconfig -c' and no errors.  Try swapping the cable around but same error at boot up.  Any ideas?

 

 

Starting Press CTRL-C for floppy boot menu

 

ispfc: Fibre Channel adapter 8b appears to be unattached/disconnected. If

   adapter is in use, check cabling and seating of LRC cards in disk shelves.

Wed Apr 16 22:33:07 GMT [ispfc_init_2:error]: Initialization failed on Fibre Channel adapter 8b.

 

ispfc: Fibre Channel adapter 7b appears to be unattached/disconnected. If

   adapter is in use, check cabling and seating of LRC cards in disk shelves.

Wed Apr 16 22:33:07 GMT [ispfc_init_4:error]: Initialization failed on Fibre Channel adapter 7b.

 

thanks,

Marcus Bui