I'd try and pull the disk physically, it usually works :-)

On Dec 19, 2007 5:16 PM, Alon Zeltser <alonz@emet.co.il> wrote:
Hello Toasters
one 250gb disk has inserted to 500gb disk aggregate by mistake
Is there a way to fix this issue ?
I tried "disk replace" command  to replace the 250g disk with 500gb spare disk but it look like it's using the 500gb disk as 250gb

     RAID Disk Device  HA  SHELF BAY CHAN Pool Type  RPM  Used (MB/blks)    Phys (MB/blks)
     --------- ------  ------------- ---- ---- ---- ----- --------------    --------------
     dparity   0c.32   0c    2   0   FC:A   -  ATA   7200 423111/866531584  423889/868126304
     parity    0d.22   0d    1   6   FC:B   -  ATA   7200 423111/866531584  423889/868126304
     data      0d.17   0d    1   1   FC:B   -  ATA   7200 423111/866531584  423889/868126304
     data      0d.19   0d    1   3   FC:B   -  ATA   7200 211377/432901760  212718/435647712 (replacing, copy in progress)
     -> copy   0c.20   0c    1   4  FC:A   -  ATA   7200 211377/432901760  423889/868126304 (copy 29% completed)
     data      0b.18   0b    1   2  FC:B   -  ATA   7200 423111/866531584  423889/868126304
     data       0b.27   0b    1   11   FC:B   -  ATA   7200 423111/866531584  423889/868126304
     data      0c.28   0c    1   12  FC:A   -  ATA   7200 423111/866531584  423889/868126304
     data      0c.16   0c    1   0   FC:A   -  ATA   7200 423111/866531584  423889/868126304

Is there a way to increase the used size without destroying this aggr and build it from scratch ?




--
Simple guidelines to happiness:
Work like you don't need the money,
Love like your heart has never been broken and
Dance like no one can see you.