The thing is, they wanted to close the issue already telling me to subscribe to the BURT and get the info from there once it’s solved.
Anyways, I talked with support on the phone and he was reading your instructions down there and said that we should try that.
I’m not really sure how to downgrade ACP to a specific version, I’ve downloaded 2.09 and installed it, but it’s not really using it for the installation.
What I can do is I can revert to the version shipped with Ontap 9.1P2, which is what I did now by running:
storage download acp –R
but it did only install FW 2.10 again, but afterwards, it looked like this:
Node Module Name State
----------------- ----------------- ----------------------
nodeA 1.22.B firmware-update-required
1.22.A firmware-update-required
2.11.A active
2.11.B firmware-update-required
2.14.B active
2.14.A active
2.12.A active
2.12.B firmware-update-required
2.13.A active
2.13.B firmware-update-required
1.21.B active
1.21.A active
nodeB 1.22.B firmware-update-required
1.22.A firmware-update-required
2.11.A active
2.11.B firmware-update-required
2.14.B active
2.14.A active
2.12.A active
2.12.B firmware-update-required
2.13.A active
2.13.B firmware-update-required
1.21.B active
1.21.A active
24 entries were displayed.
So I thought let’s do this again and it will fix the other half of the ACPs too, but it didn’t.
But at least half of them are fixed now J
Best,
Alexander Griesser
Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.com
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt
Geschäftsführer: Alexander Windbichler
Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
Von: toasters-bounces@teaparty.net [mailto:toasters-bounces@
teaparty.net ] Im Auftrag von Alexander Griesser
Gesendet: Samstag, 8. April 2017 19:20
An: tmac <tmacmd@gmail.com>
Cc: toasters@teaparty.net
Betreff: AW: Switching to ACP inband connectivity
Yah, no worries, I have time and endurance for things like that J No rush here on my end.
Alexander Griesser
Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.com
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt
Geschäftsführer: Alexander Windbichler
Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
Von: tmac [mailto:tmacmd@gmail.com]
Gesendet: Samstag, 8. April 2017 19:17
An: Alexander Griesser <AGriesser@anexia-it.com>
Cc: toasters@teaparty.net
Betreff: Re: Switching to ACP inband connectivity
Yep. internal burt, but a burt none the less. save them from digging it up.
Let us know how you make out. I was under a crunch putting a system into production and could not fool around with it any more.
Thanks
On Sat, Apr 8, 2017 at 12:29 PM, Alexander Griesser <AGriesser@anexia-it.com> wrote:
Alright, thanks – I’m opening a case now, cannot see the details of the BURT, though, but will refer support to it.
Best,
Alexander Griesser
Head of Systems Operations
ANEXIA Internetdienstleistungs GmbH
E-Mail: AGriesser@anexia-it.com
Anschrift Hauptsitz Klagenfurt: Feldkirchnerstraße 140, 9020 Klagenfurt
Geschäftsführer: Alexander Windbichler
Firmenbuch: FN 289918a | Gerichtsstand: Klagenfurt | UID-Nummer: AT U63216601
Von: tmac [mailto:tmacmd@gmail.com]
Gesendet: Samstag, 8. April 2017 14:05
An: Alexander Griesser <AGriesser@anexia-it.com>
Cc: toasters@teaparty.net
Betreff: Re: Switching to ACP inband connectivity
I have seen this! Support was unable to reproduce for me. I will dig up a case number later if you like.
I will give you two options:
1. Open a support case with netapp and refer to the BURT 1050364 / Case 2006580487
2. The ultimate fix that I did was this:
-> Downgrade *all* IOM firmware to 2.09. Wait for it to stabilize.
-> Convert to in-band. Wait for it to stabilize and confirm IN-Band
-> Convert to out-of-band and upgrade to 2.10 firmware.
-> Wait for it to stabilize and then convert to out-of-band
I got to believe there may be some race condition where the 2.08 -> 2.10 firmware is not completing 100%.
If you use the out-of-band, all looks ok, but switch to in-band and not so much.
The thought is something special happens on 2.09 that fixes everything allowing the upgrade to 2.10
If possible, please open a case and refer to the data above. I think it is in everyones best interest NetApp gets to the bottom of this to fix.
Thanks
--tmac
Tim McCarthy, Principal Consultant
[ stripping my own post due to size limitations on this mailing list ]