I will check but so far the only error, cannot connect to source. But unbroken mirror continue to work to same array and network is there.
Quisce command fails with the same error, it cannot connect to source

On Mar 25, 2015, at 8:48 PM, Basil <basilberntsen@gmail.com> wrote:

Is there anything in the snapmirror log that might explain what it's stuck on? What's the status of that base snapshot on the primary volume?

On Wed, Mar 25, 2015 at 8:03 PM, Iluhes <iluhes@yahoo.com> wrote:
Yes, qtree they were r/w and we tried to put them back in sync, and they are not syncing anymore...
it is totaly stuck
Source:                 xxxx
Destination:            yyyy
Status:                 Pending
Progress:               -
State:                  Snapmirrored
Lag:                    150:43:14
Mirror Timestamp:       Thu Mar 19 11:30:02 CDT 2015
Base Snapshot:          yyyy(2017123113)_
Current Transfer Type:  Retry
Current Transfer Error: cannot connect to source filer
Contents:               Transitioning
Last Transfer Type:     Scheduled
Last Transfer Size:     8 KB
Last Transfer Duration: 00:00:02
Last Transfer From:    xxxxx




On Wednesday, March 25, 2015 7:00 PM, Basil <basilberntsen@gmail.com> wrote:


These are qtree snapmirrors, yeah? What are you trying to do? Make the targets r/w? Or resync?

On Wed, Mar 25, 2015 at 7:51 PM, Iluhes <iluhes@yahoo.com> wrote:
From source files XXX (XXX-repl is the replicatin IP)

Source                             Destination                        State          Lag        Status
XXX:/vol/zzz/vol06  YYY:/vol/zzz/vol06  Source         151:17:27  Idle
XXX:/vol/zzz/vol52  YYY:/vol/zzz/vol52  Source         151:17:30  Idle
XXX:/vol/zzz/vol53  YYY:/vol/zzz/vol53  Source         151:17:30  Idle
XXX:/vol/zzz/vol56  YYY:/vol/zzz/vol56  Source         151:17:28  Idle
XXX:/vol/zzz/vol58  YYY:/vol/zzz/vol58  Source         151:17:30  Idle
XXX:/vol/zzz/vol60  YYY:/vol/zzz/vol60  Source         151:17:29  Idle
XXX:/vol/zzz/vol62  YYY:/vol/zzz/vol62  Source         151:17:27  Idle
XXX:/vol/zzz/vol64  YYY:/vol/zzz/vol64  Source         151:17:28  Idle
XXX:/vol/zzz/vol66  YYY:/vol/zzz/vol66  Source         151:17:29  Idle
XXX:/vol/zzz/vol68  YYY:/vol/zzz/vol68  Source         151:17:29  Idle
XXX:/vol/test1/test1_q         YYY:/vol/test1/test1_q         Source         00:00:30   Idle
XXX:/vol/vol1/yyy       YYY:/vol/vol1/yyy       Source         00:17:30   Idle

Destination YYY (notice that some of the existing once are still in sync)

Source                                           Destination                        State          Lag        Status
XXX-rep.fnfis.com:/vol/zzz/vol06  YYY:/vol/zzz/vol06  Snapmirrored   151:16:34  Pending
XXX-rep.fnfis.com:/vol/zzz/vol52  YYY:/vol/zzz/vol52  Snapmirrored   151:16:37  Pending
XXX-rep.fnfis.com:/vol/zzz/vol53  YYY:/vol/zzz/vol53  Snapmirrored   151:16:37  Pending
XXX-rep.fnfis.com:/vol/zzz/vol56  YYY:/vol/zzz/vol56  Snapmirrored   151:16:35  Pending
XXX-rep.fnfis.com:/vol/zzz/vol58  YYY:/vol/zzz/vol58  Snapmirrored   151:16:37  Pending
XXX-rep.fnfis.com:/vol/zzz/vol60  YYY:/vol/zzz/vol60  Snapmirrored   151:16:36  Pending
XXX-rep.fnfis.com:/vol/zzz/vol62  YYY:/vol/zzz/vol62  Snapmirrored   151:16:34  Pending
XXX-rep.fnfis.com:/vol/zzz/vol64  YYY:/vol/zzz/vol64  Snapmirrored   151:16:35  Pending
XXX-rep.fnfis.com:/vol/zzz/vol66  YYY:/vol/zzz/vol66  Snapmirrored   151:16:36  Transferring
XXX-rep.fnfis.com:/vol/zzz/vol68  YYY:/vol/zzz/vol68  Snapmirrored   151:16:36  Pending
XXX-rep.fnfis.com:/vol/test1/test1_q         YYY:/vol/test1/test1_q           Snapmirrored   00:00:37   Idle
XXX-rep.fnfis.com:/vol/vol1/yyy           YYY:/vol/vol1/yyy                Snapmirrored   00:16:37   Idle
XXX-rep.fnfis.com:/vol/vol1/nnn         YYY:/vol/vol1/nnn           Snapmirrored   151:16:37  Idle





On Wednesday, March 25, 2015 6:44 PM, Basil <basilberntsen@gmail.com> wrote:


Please output the results of snapmirror status (on both filers) as well as snap list volname for a volume you can't break. 

On Wed, Mar 25, 2015 at 7:22 PM, Jeff Bryer <bryer@sfu.ca> wrote:
We have had similar issues with SnapVault (7-mode).  Some times we could work around it by disabling
SnapVault and aborting the process.  Other times we had to create a new relationship and a new baseline.

We haven't seen any issues so far on c-mode, and we have lost connectivity between the cluster peers.

----- Original Message -----
From: "Iluhes" <iluhes@yahoo.com>
To: "Toasters" <toasters@teaparty.net>
Sent: Wednesday, March 25, 2015 3:25:52 PM
Subject: snapmirror can notquiesced or broken

snapmirror quiesce: cannot connect to source filer

I can clearly connect to source filer and network connectivity is restored
but snapmirrors are stuck and cannot be broken or anything done to them
What do I do



_______________________________________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters

_______________________________________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters