As collegues probably pointed out

For the moment shelf remove (hence swap) is NOT supported.


You may add a new shelf to an existing loop and 2 new drives in that shelf and "disk replace"-then-move-the-spares-to-the-new-shelf-and-repeat-until-the-shelf-is-empty-but-the-two-first-slots, but you will not be able to remove this bad-but-now-empty shelf without downtime.

By the way, swapping a shelf can be done quickly if well prepared (5 minutes with 4 hands).


_________________
Michael Bernardoff
FSE@netapp
+33 679 028 224

-----Original Message-----
From: Nils Vogels <bacardicoke@gmail.com>
To: Robert Lazzurs <rob@lazzurs.net>
CC: toasters@mathworks.com <toasters@mathworks.com>
Sent: Wed Jan 23 15:16:57 2008
Subject: Re: Failed shelf

On Jan 23, 2008 3:19 PM, Robert Lazzurs <rob@lazzurs.net> wrote:



        Also this brings me to ask (I think I already know the answer) can you
        add a shelf to a loop without taking the storage controller down?
       


Yes, this is possible, as long as the shelf is supported in the already existing loop.


--
Simple guidelines to happiness:
Work like you don't need the money,
Love like your heart has never been broken and
Dance like no one can see you.