Thanks!!

What is killing me is that I dont know how to check with OPM is even passing data to OCUM.

I followed the steps on linking them together, but how do I test?

Is this seriusly going to be end state and netapp will no longer have performance analytical tool?

On Monday, April 20, 2015 1:20 PM, "Weber, Mark A" <mark-a-weber@uiowa.edu> wrote:

I don’t think you can, plus no node level or cluster level view or aggregate, network…

 

What I do is setup OPM to send stats to graphite:

http://transitiontactician.com/?p=24

http://www.dburkland.com/how-to-setup-graphite-to-visualize-oncommand-performance-manager-data/

 

m

 

From: Iluhes [mailto:iluhes@yahoo.com] 
Sent: Monday, April 20, 2015 1:00 PM
To: Weber, Mark A
Cc: Toasters
Subject: Re: what in the world happend to performance (dfm) advisor with CDOT

 

How do I see which volume is eating the performance?

Do I have to go through each volume manually via search?

 

 

 

On Monday, April 20, 2015 12:58 PM, Iluhes <iluhes@yahoo.com> wrote:

 

8.3 forces to use 6.2 right? So there is 5.x possibility. 

I will try searching, but it still seems significantly crippled, and I mean significantly.

Is anyone listening in netapp. They are pushing this CMOD so very much, and now what?

 

 

 

On Monday, April 20, 2015 12:38 PM, "Weber, Mark A" <mark-a-weber@uiowa.edu> wrote:

 

There isn’t feature parity with DFM yet.

To view IOPS/etc graphs, search for the volume/aggr/node using the search box in OPM (not OCUM)

 

m

 

From: toasters-bounces@teaparty.net [mailto:toasters-bounces@teaparty.net] On Behalf Of Iluhes
Sent: Monday, April 20, 2015 12:22 PM
To: Francis Kim
Cc: Toasters
Subject: Re: what in the world happend to performance (dfm) advisor with CDOT

 

I see nothing in OCUM, no performance graphs, no ability to drill into iops or anything...

I connected OCUM with perfromance manager and nothing I can find where I can see details on the performance like I would be able to get with Managemnt console and Performace advisor

 

 

 

 

On Monday, April 20, 2015 12:09 PM, Francis Kim <fkim@BERKCOM.com> wrote:

 

Did you check out OnCommand Unified Manager?  DFM has been rolled into OCUM. OCUM 6.1 and beyond is a CDOT-specific release.

 

Francis Kim | Engineer

510-644-1599 x334 | fkim@berkcom.com

 

BerkCom | www.berkcom.com

NetApp | Cisco | Supermicro | Brocade | VMware

 

On Apr 20, 2015, at 10:06 AM, Iluhes <iluhes@yahoo.com> wrote:

 

What happened? Where are all the performance graphs, they are all gone.

Did the tool get killed? The performance manager is almost empty

 

_______________________________________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters

 

 

 

 

_______________________________________________
Toasters mailing list
Toasters@teaparty.net
http://www.teaparty.net/mailman/listinfo/toasters