NDMP backup is the by far the best choice. You can ether use Veritas or IBM TSM. TSM has more advance features then NetBAckup, but it is more complicated to setup initially
I would strongly encourage you  consider new line of Cisco SAN switches (MDS). I think the it rather impressive .Among many advances, It will allow you to segregator  backup in different fabric/VSAN.


"Bui, Marcus" <Marcus.Bui@aiminvestments.com>
Sent by: owner-toasters@mathworks.com

09/15/2004 01:11 PM

       
        To:        "'SKIP HOFMANN'" <SKIP.HOFMANN@ttisg.com>, toasters@mathworks.com
        cc:        RAYMUND SANTOS <RAYMUND.SANTOS@ttisg.com>
        Subject:        RE: Fiber San



Skip,
 
We are using Netbackup Datacenter, running on Solaris, with the Brocade Silkworm 3800 and Quantum P6000 and P7000 SDLT.  All the HBAs on Windows server, connecting to another SAN, uses QLogic 24xx.  The 3800 is use primarily for Filer backup since our QLogic switch was not certify with Netapp at the time.  So far the QLogic, 3800, and Netbackup works great.  You will need to the NDMP option with Netbackup to backup the Filer without using CIFS shares.  NDMP will likely increase your backup performance.
 
Good Luck!

Marcus Bui
AIM Investments
IT Services
phone: 713-986-9061
fax: 713-821-9524
email: marcus.bui@aiminvestments.com
pager: 8773450839@archwireless.net
 
-----Original Message-----
From: owner-toasters@mathworks.com [mailto:owner-toasters@mathworks.com] On Behalf Of SKIP HOFMANN
Sent: Wednesday, September 15, 2004 12:37 PM
To: toasters@mathworks.com
Cc: RAYMUND SANTOS
Subject: Fiber San
 
Hi all
 
We currently have an R200 that holds around 2 TB's of data. We have been backing this up using Cifs shares with Veritas backup exec, needles to say this has been a very painful and slow process. We are now looking into the idea of building a fiber SAN. Our Backup tape device is a Scalar 24 the drive is an IBM ULTRIUM-TD2, the server that will be running netback up is a windows 2003 server, and this along with the R200 will be plugged into the Fiber SAN. What I would like some advice on here is what type of fiber switch would you all recommend? I was looking at the 3200 also any recommendations on fiber nic cards for my 2003 box? http://www.brocade.com/products/silkworm/silkworm_3200/sw_3200.jsp  
 
Thanks for any comments on this
 
Skip Hofmann
Senior Network Administrator
TetraTech
Skip.Hofmann@ttisg.com
949 500 5286 cell
949 608 5801 office
 


---------------------------------------------------------------------------
This message (including any attachments) is confidential and may be privileged. If you have received it by mistake please notify the sender by return e-mail and delete this message from your system. Any unauthorised use or dissemination of this message in whole or in part is strictly prohibited. Please note that e-mails are susceptible to change.
ABN AMRO Bank N.V. (including its group companies) shall not be liable for the improper or incomplete transmission of the information contained in this communication nor for any delay in its receipt or damage to your system. ABN AMRO Bank N.V. (or its group companies) does not guarantee that the integrity of this communication has been maintained nor that this communication is free of viruses, interceptions or interference.
---------------------------------------------------------------------------